PartsTable
Technical Data Sheet
PartsTable / MRO / 2600-02
2600-02 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Always quote matching pair — mixed wattage causes throttling Platinum/Titanium = higher efficiency = lower power cost over time
AC or DC input? Verify customer site power
PRODUCT OVERVIEW

The AMPLIFIER-POWER SUPPLY is a the manufacturer power supply unit built for continuous operation in enterprise server and storage platforms. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, nut_style: PLATE, nut_height: 0.229 INCHES MAXIMUM IN, nut_length: 0.983 INCHES NOMINAL IN, plate_width: 0.381 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5895-01-540-3771, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2600-02
NSN: 5895-01-540-3771
FSC: 5895
CAGE: 06GW1 — MILPOWER, INC. DBA MILPOWER INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
nut_stylePLATE
nut_height0.229 INCHES MAXIMUM IN
nut_length0.983 INCHES NOMINAL IN
plate_width0.381 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
thread_class3B
overall_depth20.500 INCHES NOMINAL IN
overall_width17.3 INCHES NOMINAL IN
thread_seriesUNF
overall_height3.5 INCHES NOMINAL IN
overall_length13.0 INCHES NOMINAL IN
NSN5895-01-540-3771
COMPONENT DIAGRAM
PULL TAB AIRFLOW —W PLATINUM 100-240V~ 50/60Hz OEM BACKPLANE CONN ~200 mm HOT-PLUG POWER SUPPLY | —W | Platinum AC input 100-240V | Redundant pair required | Match wattage in same chassis TITLE PSU —W PN 2600-02 MFR OEM Platinum
KEY FEATURES
•
SUPPLEMENTARY FEATURES: PRIME POWER: 103-126VAC, 45-420 HZ, SINGLE PHASE PER MIL-STD-1399; VIBRATION: MIL-STD-167-1 TYPE 1; ACOUSTIC NOISE: LESS THAN 67 DB AT 3 FT; OPERATING TEMP: 0-50 DEG C; NON-OPERATING: M40 - P70 DEG C; HUMIDITY: 95 PERCENT, NON-CONDENSING; EMI/EMC: MIL-STD-461C; MTFB: GREATER THAN 5000 HOURS VAC
•
POWER SUPPLY OUTPUT CURRENT TYPE: AC
•
POWER SUPPLY OUTPUT VOLTAGE RATING: 115.0 VOLTS NOMINAL
TYPICAL APPLICATIONS
  • Server power supply replacement (failed or degraded)
  • Redundant power upgrade for high-availability
  • Power capacity upgrade for GPU or expansion configurations
  • Hot-swap power maintenance in production environments
  • Spare inventory for break-fix operations
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESPRIME POWER: 103-126VAC, 45-420 HZ, SINGLE PHASE PER MIL-STD-1399; VIBRATION: MIL-STD-167-1 TYPE 1; ACOUSTIC NOISE: LESS THAN 67 DB AT 3 FT; OPERATING TEMP: 0-50 DEG C; NON-OPERATING: M40 - P70 DEG C; HUMIDITY: 95 PERCENT, NON-CONDENSING; EMI/EMC: MIL-STD-461C; MTFB: GREATER THAN 5000 HOURS VAC
POWER SUPPLY OUTPUT CURRENT TYPEAC
OVERALL WIDTH19.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYDMR 200-WATT AMP
OVERALL HEIGHT5.250 INCHES NOMINAL IN
OVERALL DEPTH20.500 INCHES NOMINAL IN
POWER SUPPLY OUTPUT VOLTAGE RATING115.0 VOLTS NOMINAL
END ITEM IDENTIFICATIONPOWER AMPLIFIER: AM-75848
SPECIAL FEATURESFREQUENCY RANGE: 30-400 MHZ; INPUT POWER: M15 - P 10 DBM; RF GAIN CONTROL: 1 DB STEPS INPUT RANGE M15 - P10 DBM, OUTPUT RANGE: P43 DBM (20 WATTS) TO 53 DBM (200 WATTS); CONTROL INTERFACE: EHTERNET/IEEE 802.3 10.100 BASET SNMP PROTOCOL MHz
SUPPLEMENTARY FEATURESPRIME POWER: 103-126VAC, 45-420 HZ, SINGLE PHASE PER MIL-STD-1399; VIBRATION: MIL-STD-167-1 TYPE 1; ACOUSTIC NOISE: LESS THAN 67 DB AT 3 FT; OPERATING TEMP: 0-50 DEG C; NON-OPERATING: M40 - P70 DEG C; HUMIDITY: 95 PERCENT, NON-CONDENSING; EMI/EMC: MIL-STD-461C; MTFB: GREATER THAN 5000 HOURS VAC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
10119445Interchangeable
interchangeable cross-reference
interchangeable
26000-2Interchangeable
interchangeable cross-reference
interchangeable
MS28782Interchangeable
interchangeable cross-reference
interchangeable
260002-1Interchangeable
interchangeable cross-reference
interchangeable
480-05-1Interchangeable
interchangeable cross-reference
interchangeable
269457Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 2600-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2600-02?
2600-02 is a AMPLIFIER-POWER SUPPLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2600-02?
There are 8 known substitutes for 2600-02: 10119445, 26000-2, MS28782 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2600-02?
2600-02 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5895-01-540-3771. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2600-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026