PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 26-9-106
26-9-106 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN, overall_length: 8.060 INCHES NOMINAL IN, cross-sectional_thickness: 0.369 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-0766, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
26-9-106
NSN: 5330-00-006-0766
FSC: 5330
CAGE: 04010 — CADILLAC GAGE TEXTRON INC CONTROL SYSTEMS OPNS SUB OF TEXTRON INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN
overall_length8.060 INCHES NOMINAL IN
cross-sectional_thickness0.369 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-006-0766
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 26-9-106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.369 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.369 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
OVERALL WIDTH2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALRUBBER SYNTHETIC OVERALL
OVERALL LENGTH8.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
C39Interchangeable
interchangeable cross-reference
interchangeable
1072973Interchangeable
interchangeable cross-reference
interchangeable
116216Interchangeable
interchangeable cross-reference
interchangeable
GPW9586Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 26-9-106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26-9-106?
26-9-106 is a GASKET.
What parts can replace 26-9-106?
There are 4 known substitutes for 26-9-106: C39, 1072973, 116216 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 26-9-106?
26-9-106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-0766. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26-9-106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026