PartsTable
Technical Data Sheet
Download PDF

26-630 — REEL,CABLE

✓ Government record, cited
InLine · ORING SEAL
PRODUCT OVERVIEW

26-630: REEL,CABLE.

With this adapter you are able to connect server mainboards which are equipped with 8 pin power connectors to a 5,25" power supply connector. Key specifications include phase: SINGLE SINGLE VOLTAGE, material: STEEL CORROSION RESISTING SHEATH, body_style: ODD/IRREGULAR SHAPED ITEMS, terminal_length: 0.312 INCHES NOMINAL IN, heat_control_type: THERMAL CUTOUT SWITCH, frequency_in_hertz: 60.0. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-173-1783, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
26-630
NSN: 5340-00-173-1783
NIINs: 001731783, 004913272, 008259176
FSC: 5340 — Hardware, Commercial
CAGE: 64829 — ARVINMERITOR INC (USA)
SPECIFICATIONS
phaseSINGLE SINGLE VOLTAGE
materialSTEEL CORROSION RESISTING SHEATH
body_styleODD/IRREGULAR SHAPED ITEMS
heat_quantity1
turn_quantity8
terminal_length0.312 INCHES NOMINAL IN
element_quantity1
heat_control_typeTHERMAL CUTOUT SWITCH
terminal_quantity2
frequency_in_hertz60.0
mounting_method_styleTERMINAL MOUNTED
effective_heating_length1.188 INCHES NOMINAL IN
NSN5340-00-173-1783
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 26-630 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TT-E-485 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
DIAMETER: 0.344 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.156 INCHES NOMINAL IN
•
SURFACE TREATMENT: ENAMEL BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.750 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 BAND
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONTT-E-485 FED SPEC SINGLE TREATMENT RESPONSE BAND
DIAMETER0.344 INCHES NOMINAL IN
OVERALL WIDTH2.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.156 INCHES NOMINAL IN
SURFACE TREATMENTENAMEL BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.750 INCHES NOMINAL IN
MATERIALSTEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 BAND
LOOP INSIDE DIAMETER4.812 INCHES MINIMUM AND 4.875 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
7351188Reference document
Same NSN cross-reference
Reference document — Secondary reference
865876Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
920260Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 26-630?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26-630?
26-630 is a REEL,CABLE manufactured by InLine.
What parts can replace 26-630?
There are 3 known substitutes for 26-630: 7351188, 865876, 920260. Substitute compatibility should be verified for your specific system.
What is the NSN for 26-630?
26-630 is cataloged in the U.S. Government catalog under NSN 5340-00-173-1783. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26-630