PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 25Z92-D11
25Z92-D11 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,JOURNAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 3.7500 INCHES NOMINAL IN, overall_width: 2.6250 INCHES NOMINAL IN, alignment_type: RIGID, style_designator: SOLID OUTER RACE, NO INNER RACE, features_provided: LUBRICATION HOLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-186-7176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25Z92-D11
NSN: 3110-01-186-7176
FSC: 3110
CAGE: 27315 — MORRIS MATERIAL HANDLING, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter3.7500 INCHES NOMINAL IN
overall_width2.6250 INCHES NOMINAL IN
alignment_typeRIGID
style_designatorSOLID OUTER RACE, NO INNER RACE
features_providedLUBRICATION HOLE
overall_outside_diameter140.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
NSN3110-01-186-7176
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 25Z92-D11 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 3.7500 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: SOLID OUTER RACE, NO INNER RACE
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 140.0 MILLIMETERS NOMINAL MM
•
FEATURES PROVIDED: LUBRICATION HOLE
•
RETAINER FABRICATION METHOD: MACHINED
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER3.7500 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORSOLID OUTER RACE, NO INNER RACE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER140.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH2.6250 INCHES NOMINAL IN
FEATURES PROVIDEDLUBRICATION HOLE
RETAINER FABRICATION METHODMACHINED
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
21642-36Interchangeable
interchangeable cross-reference
interchangeable
1926Interchangeable
interchangeable cross-reference
interchangeable
652762Interchangeable
interchangeable cross-reference
interchangeable
B21642Interchangeable
interchangeable cross-reference
interchangeable
CW-99216Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25Z92-D11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25Z92-D11?
25Z92-D11 is a BEARING,ROLLER,JOURNAL.
What parts can replace 25Z92-D11?
There are 5 known substitutes for 25Z92-D11: 21642-36, 1926, 652762 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25Z92-D11?
25Z92-D11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-186-7176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25Z92-D11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026