PartsTable
Technical Data Sheet
PartsTable / MRO / 25W
25W ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include angle: 90.0 DEGREES, height: 0.938 INCHES NOMINAL IN, length: 1.375 INCHES NOMINAL IN, material: STEEL CONTACT POINT, unit_type: AUTOMATIC SPRING RETURN, body_style: CYLINDRICAL BUSHING MOUNTED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-114-2036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 25W
NSN: 5330-00-114-2036
FSC: 5330
CAGE: 04865 — NYLTITE CORP OF AMERICA (USA)
SPECIFICATIONS
angle90.0 DEGREES
height0.938 INCHES NOMINAL IN
length1.375 INCHES NOMINAL IN
materialSTEEL CONTACT POINT
unit_typeAUTOMATIC SPRING RETURN
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.410 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
oil_capacity0.094 FLUID OUNCES
point_length0.562 INCHES NOMINAL IN
shaft_length0.453 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
NSN5330-00-114-2036
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25W MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
4B352Interchangeable
interchangeable cross-reference
interchangeable
25WInterchangeable
interchangeable cross-reference
interchangeable
1237K11Interchangeable
interchangeable cross-reference
interchangeable
RP101SA101KKInterchangeable
interchangeable cross-reference
interchangeable
MIL-R-22/3Interchangeable
interchangeable cross-reference
interchangeable
M22/03-00131SAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25W?
25W is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 25W?
There are 13 known substitutes for 25W: 4B352, 25W, 1237K11 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25W?
25W is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-114-2036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25W

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026