PartsTable
Technical Data Sheet
Download PDF

25R6-10-072C4 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

25R6-10-072C4: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, overall_length: 4.734 INCHES MINIMUM AND 4.766 INCHES MAXIMUM IN, handle_clearance: 1.562 INCHES MINIMUM AND 1.618 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, nominal_thread_size: 0.164 INCHES IN, thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-004-1696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25R6-10-072C4
NSN: 5340-00-004-1696
FSC: 5340 — Hardware, Commercial
CAGE: 28198 — POSITRONIC INDUSTRIES INC DIV AMPHENOL MILITARY AEROSPACE OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
overall_length4.734 INCHES MINIMUM AND 4.766 INCHES MAXIMUM IN
handle_clearance1.562 INCHES MINIMUM AND 1.618 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.164 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
material_document_and_classificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-14072,FINISH E300,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.484 INCHES MINIMUM AND 4.516 INCHES MAXIMUM IN
NSN5340-00-004-1696
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25R6-10-072C4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.484 INCHES MINIMUM AND 4.516 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
HANDLE CLEARANCE: 1.562 INCHES MINIMUM AND 1.618 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.484 INCHES MINIMUM AND 4.516 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.734 INCHES MINIMUM AND 4.766 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.164 INCHES IN
HANDLE CLEARANCE1.562 INCHES MINIMUM AND 1.618 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-003-0832 5340-00-003-1792 5340-00-003-1794 5340-00-003-1909 5340-00-003-5082 5340-00-003-5083 5340-00-003-5434 5340-00-003-5993
SUBSTITUTES & CROSS-REFERENCES 3
25R6-10-072CHReference document
Same NSN cross-reference
Reference document — Secondary reference
578R900H01Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
VCP-142Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 25R6-10-072C4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25R6-10-072C4?
25R6-10-072C4 is a HANDLE,BOW.
What parts can replace 25R6-10-072C4?
There are 3 known substitutes for 25R6-10-072C4: 25R6-10-072CH, 578R900H01, VCP-142. Substitute compatibility should be verified for your specific system.
What is the NSN for 25R6-10-072C4?
25R6-10-072C4 is cataloged in the U.S. Government catalog under NSN 5340-00-004-1696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25R6-10-072C4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.