PartsTable
Technical Data Sheet
PartsTable / MRO / 25P75
25P75 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_width: 1.250 INCHES NOMINAL IN, cone_width: 1.1420 INCHES NOMINAL IN, body_length: 3.062 INCHES NOMINAL IN, bore_diameter: 2.6875 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0257, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 25P75
NSN: 3110-00-100-0257
FSC: 3110
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.250 INCHES NOMINAL IN
cone_width1.1420 INCHES NOMINAL IN
body_length3.062 INCHES NOMINAL IN
bore_diameter2.6875 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCASED
style_designatorTERMINALS ONE EDGE
cone_corner_radius0.1406 INCHES NOMINAL IN
mounting_hole_size0.188 INCHES NOMINAL IN
electrical_resistance75.000 OHMS
reliability_indicatorNOT ESTABLISHED
NSN3110-00-100-0257
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 25P75 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1420 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.6875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1420 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.6875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
4D2156Interchangeable
interchangeable cross-reference
interchangeable
917554Interchangeable
interchangeable cross-reference
interchangeable
144138Interchangeable
interchangeable cross-reference
interchangeable
25P75Interchangeable
interchangeable cross-reference
interchangeable
30924Interchangeable
interchangeable cross-reference
interchangeable
418-18-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25P75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25P75?
25P75 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 25P75?
There are 17 known substitutes for 25P75: 4D2156, 917554, 144138 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25P75?
25P75 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0257. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25P75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026