PartsTable
Technical Data Sheet
Download PDF

25F15 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

25F15: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: COPPER ALLOY OVERALL, body_length: 2.000 INCHES NOMINAL IN, current_type: DC, body_diameter: 0.625 INCHES NOMINAL IN, mounting_type: BASE, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-193-9770, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 25F15
NSN: 5330-00-193-9770
NIINs: 001939770, 003761471, 005566645
FSC: 5330 — Packing and Gasket Materials
CAGE: 24047 — COOPER INDUSTRIES INC DBA COOPER TOOLS (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
body_length2.000 INCHES NOMINAL IN
current_typeDC
body_diameter0.625 INCHES NOMINAL IN
mounting_typeBASE
pump_quantity1
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
terminal_width0.250 INCHES NOMINAL IN
terminal_length0.562 INCHES NOMINAL IN
outside_diameter0.562 INCHES NOMINAL IN
prime_mover_typeELECTRIC MOTOR
NSN5330-00-193-9770
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25F15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
OUTSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OUTSIDE DIAMETER0.562 INCHES NOMINAL IN
APERTURE DIAMETER0.375 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
19-8-2576Reference document
Same NSN cross-reference
Reference document — Secondary reference
5094SReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 25F15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25F15?
25F15 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 25F15?
There are 2 known substitutes for 25F15: 19-8-2576, 5094S. Substitute compatibility should be verified for your specific system.
What is the NSN for 25F15?
25F15 is cataloged in the U.S. Government catalog under NSN 5330-00-193-9770. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25F15