PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 25BC33XHH0M
25BC33XHH0M ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.0 MILLIMETERS NOMINAL MM, overall_width: 1.0000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-764-3335, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25BC33XHH0M
NSN: 3110-00-764-3335
FSC: 3110
CAGE: 70413 — ANTI-FRICTION BEARING MFG ASSN INC THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.0 MILLIMETERS NOMINAL MM
overall_width1.0000 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresFURNISHED W/O GREASE PLUG
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
bearing_seal_typeLABYRINTH
lubrication_materialGREASE
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
NSN3110-00-764-3335
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 25BC33XHH0M · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
SPECIAL FEATURESFURNISHED W/O GREASE PLUG
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
SEAL QUANTITY2
BEARING SEAL TYPELABYRINTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
151616Interchangeable
interchangeable cross-reference
interchangeable
405850-59LInterchangeable
interchangeable cross-reference
interchangeable
S-3605Interchangeable
interchangeable cross-reference
interchangeable
3287986REVBPC09Interchangeable
interchangeable cross-reference
interchangeable
3110PL0965772Interchangeable
Same NIIN cross-reference
interchangeable
405850-52LInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25BC33XHH0M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25BC33XHH0M?
25BC33XHH0M is a BEARING,BALL,ANNULAR.
What parts can replace 25BC33XHH0M?
There are 7 known substitutes for 25BC33XHH0M: 151616, 405850-59L, S-3605 and 4 more. Substitute compatibility should be verified for your specific system.
Is 25BC33XHH0M still available?
25BC33XHH0M is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25BC33XHH0M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026