PartsTable
Technical Data Sheet
Download PDF

25A187-3 — PLUG,FUSIBLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

25A187-3: PLUG,FUSIBLE.

The PLUG,FUSIBLE is a the manufacturer industrial component. Key specifications include core_diameter: 0.340 INCHES NOMINAL IN, standard_designator: AMERICAN SOCIETY OF MECHANICAL ENGINEERS, core_fusing_temp_rating: 210.0 DEG FAHRENHEIT, thread_size_and_series/type_designator: 3/8-18 NPT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-685-5726, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25A187-3
NSN: 5340-00-685-5726
FSC: 5340 — Hardware, Commercial
CAGE: 10119 — HARTFORD COMPRESSORS INC (USA)
SPECIFICATIONS
core_diameter0.340 INCHES NOMINAL IN
special_featuresCORE MATERIAL IS TIN; CORE INCLUDED; SIZE DESIGNATION 3/8 INCH; CASING MATERIAL IS BRASS QQ-B-626 ALLOY 360 1/2 HARD; HEAT NUMBER STAMPED ON CORE INCLUDED; BLOWOFF LINE TYPE THREADED IN
standard_designatorAMERICAN SOCIETY OF MECHANICAL ENGINEERS
core_fusing_temp_rating210.0 DEG FAHRENHEIT
thread_size_and_series/type_designator3/8-18 NPT
NSN5340-00-685-5726
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25A187-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD DESIGNATOR: AMERICAN SOCIETY OF MECHANICAL ENGINEERS
•
CORE DIAMETER: 0.340 INCHES NOMINAL IN
•
CORE FUSING TEMP RATING: 210.0 DEG FAHRENHEIT
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 3/8-18 NPT
TECHNICAL CHARACTERISTICS
STANDARD DESIGNATORAMERICAN SOCIETY OF MECHANICAL ENGINEERS
CORE DIAMETER0.340 INCHES NOMINAL IN
SPECIAL FEATURESCORE MATERIAL IS TIN; CORE INCLUDED; SIZE DESIGNATION 3/8 INCH; CASING MATERIAL IS BRASS QQ-B-626 ALLOY 360 1/2 HARD; HEAT NUMBER STAMPED ON CORE INCLUDED; BLOWOFF LINE TYPE THREADED IN
CORE FUSING TEMP RATING210.0 DEG FAHRENHEIT
THREAD SIZE AND SERIES/TYPE DESIGNATOR3/8-18 NPT
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
A14026Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 25A187-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25A187-3?
25A187-3 is a PLUG,FUSIBLE.
What parts can replace 25A187-3?
There is 1 known substitute for 25A187-3: A14026. Substitute compatibility should be verified for your specific system.
What is the NSN for 25A187-3?
25A187-3 is cataloged in the U.S. Government catalog under NSN 5340-00-685-5726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25A187-3