PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 25A01005-0007
25A01005-0007 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, design_type: FRICTION, overall_diameter: 1.240 INCHES NOMINAL IN, special_features: 7.5 IN LONG TIE STRAP IN, inside_diameter_length: 1.620 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-144-2892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25A01005-0007
NSN: 5340-01-144-2892
FSC: 5340
CAGE: 07418 — JOSLYN SUNBANK COMPANY, LLC DBA JOSLYN SUNBANK CO LLC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
design_typeFRICTION
overall_diameter1.240 INCHES NOMINAL IN
special_features7.5 IN LONG TIE STRAP IN
inside_diameter_length1.620 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
opening_inside_diameter_for_which_designed0.780 INCHES NOMINAL IN
NSN5340-01-144-2892
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25A01005-0007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 1.620 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.780 INCHES NOMINAL IN
•
OVERALL DIAMETER: 1.240 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES7.5 IN LONG TIE STRAP IN
INSIDE DIAMETER LENGTH1.620 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.780 INCHES NOMINAL IN
OVERALL DIAMETER1.240 INCHES NOMINAL IN
DESIGN TYPEFRICTION
MATERIALRUBBER CHLOROPRENE CLASS CR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
BUWEPSDWG750022Interchangeable
interchangeable cross-reference
interchangeable
750022Interchangeable
interchangeable cross-reference
interchangeable
350022Interchangeable
interchangeable cross-reference
interchangeable
150911-2300Interchangeable
interchangeable cross-reference
interchangeable
TMN-JB-F-39Interchangeable
interchangeable cross-reference
interchangeable
12354499-07Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25A01005-0007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25A01005-0007?
25A01005-0007 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 25A01005-0007?
There are 7 known substitutes for 25A01005-0007: BUWEPSDWG750022, 750022, 350022 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25A01005-0007?
25A01005-0007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-144-2892. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25A01005-0007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026