PartsTable
Technical Data Sheet
Download PDF

2596118 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2596118: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include width: 0.200 INCHES NOMINAL IN, height: 0.122 INCHES NOMINAL IN, length: 0.250 INCHES NOMINAL IN, material: STEEL COMP 302 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 230, body_length: 8.500 INCHES NOMINAL IN, body_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-133-1981, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2596118
NSN: 5340-00-133-1981
NIINs: 001331981, 009659280
FSC: 5340 — Hardware, Commercial
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
width0.200 INCHES NOMINAL IN
height0.122 INCHES NOMINAL IN
length0.250 INCHES NOMINAL IN
materialSTEEL COMP 302 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 230
body_length8.500 INCHES NOMINAL IN
body_diameter1.375 INCHES NOMINAL IN
hole_diameter0.113 INCHES NOMINAL IN
terminal_typeTAB W/SCREW
inclosure_typeUNINCLOSED
furnished_itemsLOCKNUT
terminal_length0.562 INCHES NOMINAL IN
style_designatorRADIAL TERMINAL EACH END
NSN5340-00-133-1981
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2596118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,COND A FED SPEC ALL MATERIAL RESPONSES OR QQ-B-613,ALLOY 268,260,OR 230,1/2 HARD FED SPEC ALL MATERIAL RESPONSES
•
HEIGHT: 0.122 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
•
WIDTH: 0.200 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 230
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.113 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC ALL MATERIAL RESPONSES OR QQ-B-613,ALLOY 268,260,OR 230,1/2 HARD FED SPEC ALL MATERIAL RESPONSES
HEIGHT0.122 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
WIDTH0.200 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 230
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.113 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2596118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2596118?
2596118 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 2596118?
2596118 is cataloged in the U.S. Government catalog under NSN 5340-00-133-1981. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2596118

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.