PartsTable
Technical Data Sheet
PartsTable / MRO / 259576
259576 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, cone_width: 2.6250 INCHES NOMINAL IN, body_length: 4.250 INCHES NOMINAL IN, body_diameter: 1.125 INCHES NOMINAL IN, bore_diameter: 4.5000 INCHES NOMINAL IN, terminal_type: TAB W/SCREW. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0711, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 259576
NSN: 3110-00-100-0711
FSC: 3110
CAGE: 01957 — ACF INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width2.6250 INCHES NOMINAL IN
body_length4.250 INCHES NOMINAL IN
body_diameter1.125 INCHES NOMINAL IN
bore_diameter4.5000 INCHES NOMINAL IN
terminal_typeTAB W/SCREW
inclosure_typeENCAPSULATED
terminal_width0.438 INCHES NOMINAL IN
terminal_length0.562 INCHES NOMINAL IN
style_designatorRADIAL TERMINAL EACH END
cone_corner_radius0.2812 INCHES NOMINAL IN
electrical_resistance20.000 OHMS
NSN3110-00-100-0711
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 259576 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 2.6250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.2812 INCHES NOMINAL IN
•
BORE DIAMETER: 4.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH2.6250 INCHES NOMINAL IN
CONE CORNER RADIUS0.2812 INCHES NOMINAL IN
BORE DIAMETER4.5000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
938B0938Interchangeable
interchangeable cross-reference
interchangeable
938Interchangeable
interchangeable cross-reference
interchangeable
6 IN. FORCE CUP GSAInterchangeable
Force Cup,plumber's
interchangeable
9201Interchangeable
Force Cup,plumber's
interchangeable
ZZ-F-566Interchangeable
Force Cup,plumber's
interchangeable
41604Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 259576?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 259576?
259576 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 259576?
There are 22 known substitutes for 259576: 938B0938, 938, 6 IN. FORCE CUP GSA and 19 more. Substitute compatibility should be verified for your specific system.
Is 259576 still available?
259576 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 259576

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026