PartsTable
Technical Data Sheet
PartsTable / MRO / 25938
25938 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The INDICATOR,AZIMUTH AND RANGE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_style: BARRIER TYPE, base_thickness: 0.391 INCHES IN, overall_length: 38.0 MILLIMETERS NOMINAL MM, special_features: LOCKING BOLT FOR UNIVERSAL FEMORAL-TIBIAL NAIL. 4.9MM DIA HEAD; USE IN THE AMEDULLARY CANAL MM, board_construction: HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-304-9340, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 25938
NSN: 5330-00-304-9340
FSC: 5330
CAGE: 58880 — MEGGITT (NEW HAMPSHIRE), INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_styleBARRIER TYPE
base_thickness0.391 INCHES IN
overall_length38.0 MILLIMETERS NOMINAL MM
special_featuresLOCKING BOLT FOR UNIVERSAL FEMORAL-TIBIAL NAIL. 4.9MM DIA HEAD; USE IN THE AMEDULLARY CANAL MM
board_constructionHOLLOW CONSTRUCTION WITHOUT INSULATED STRIP
board_overall_width0.562 INCHES IN
board_overall_height0.865 INCHES IN
board_overall_length3.812 INCHES IN
mounting_hole_diameter0.156 INCHES IN
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
board_height_excluding_terminals0.562 INCHES IN
NSN5330-00-304-9340
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25938 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
25938Interchangeable
interchangeable cross-reference
interchangeable
IP225APS38GPSInterchangeable
interchangeable cross-reference
interchangeable
IP225APS38Interchangeable
interchangeable cross-reference
interchangeable
2593A-GP-08Interchangeable
interchangeable cross-reference
interchangeable
2593-GP-08Interchangeable
interchangeable cross-reference
interchangeable
92-4-1-51-LTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25938?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25938?
25938 is a INDICATOR,AZIMUTH AND RANGE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 25938?
There are 11 known substitutes for 25938: 25938, IP225APS38GPS, IP225APS38 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25938?
25938 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-304-9340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25938

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026