PartsTable
Technical Data Sheet
Download PDF

25935HYP — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

25935HYP: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.950 INCHES NOMINAL IN, material: COTTON INTERMEDIATE RING, inside_diameter: 1.500 INCHES NOMINAL IN, outside_diameter: 2.000 INCHES NOMINAL IN, cross-sectional_shape_style: ANGLE BOTTOM RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-788-0499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25935HYP
NSN: 5330-00-788-0499
FSC: 5330 — Packing and Gasket Materials
CAGE: 54845 — HOIST LIFTRUCK MFG INC (USA)
SPECIFICATIONS
height0.950 INCHES NOMINAL IN
materialCOTTON INTERMEDIATE RING
inside_diameter1.500 INCHES NOMINAL IN
outside_diameter2.000 INCHES NOMINAL IN
intermediate_ring_quantity4
cross-sectional_shape_styleANGLE BOTTOM RING
NSN5330-00-788-0499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25935HYP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE RING QUANTITY: 4
•
OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE BOTTOM RING
•
INSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
HEIGHT: 0.950 INCHES NOMINAL IN
•
MATERIAL: COTTON INTERMEDIATE RING
TECHNICAL CHARACTERISTICS
INTERMEDIATE RING QUANTITY4
OUTSIDE DIAMETER2.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE BOTTOM RING
INSIDE DIAMETER1.500 INCHES NOMINAL IN
HEIGHT0.950 INCHES NOMINAL IN
MATERIALCOTTON INTERMEDIATE RING
MATERIALCOTTON BOTTOM RING
MATERIALCOTTON TOP RING
SUBSTITUTES & CROSS-REFERENCES 3
P67446Reference document
Same NSN cross-reference
Reference document — Secondary reference
A4159Reference document
Same NSN cross-reference
Reference document — Secondary reference
B7812-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 25935HYP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25935HYP?
25935HYP is a PACKING ASSEMBLY.
What parts can replace 25935HYP?
There are 3 known substitutes for 25935HYP: P67446, A4159, B7812-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 25935HYP?
25935HYP is cataloged in the U.S. Government catalog under NSN 5330-00-788-0499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25935HYP