The Winch,drum,vehicle Mounting, cataloged under National Stock Number 2590-01-303-8114, is classified within Federal Supply Class 2590 (Miscellaneous Vehicular Components) of the Vehicular Equipment Components group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2590-01-303-8114 |
| Item Name | Winch,drum,vehicle Mounting |
| FSC / FSG | 2590 / 25 — Miscellaneous Vehicular Components |
| Status | ACTIVE |
| Duty Cycle | INTERMITTENT |
| Load Limit at Selected Speed and Drum Location | 800.0 POUNDS SINGLE SPEED FIRST DRUM LBS |
| Current Type | DC |
| Drum Flange Diameter and Location | 8.000 INCHES NOMINAL FIRST DRUM IN |
| Drum Flange to Flange Distance and Location | 3.000 INCHES NOMINAL FIRST DRUM IN |
| Gear Housing Location and Quantity | 1 LEFT OF DRUM |
| Drum Surface Design | GROOVED |
| Voltage in Volts | 24.0 |
| Cooling Method | AIR TO AIR COOLED |
| Travel Rate Per Minute | 50.0 FEET FT |
| Prime Mover Quantity | 1 |
| Winch Length | 24.380 INCHES NOMINAL IN |
| Drive End Location | ANY ACCEPTABLE |
| Environmental Protection | CORROSION RESISTANT |
| Prime Mover Type | ELECTRIC MOTOR |
| Power Requirement Rating | 40.00 WATTS |
| Operation Method | POWERED |
| Drum Diameter and Location | 6.000 INCHES NOMINAL FIRST DRUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| U632AV | 3/9 Design control — primary reference Barient Inc |
| 13228E3107 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 2590-01-303-8114 is a Winch,drum,vehicle Mounting, classified under FSC 2590, Miscellaneous Vehicular Components. Status: active.
Key specifications for 2590-01-303-8114: Duty Cycle: INTERMITTENT; Load Limit at Selected Speed and Drum Location: 800.0 POUNDS SINGLE SPEED FIRST DRUM LBS; Current Type: DC; Drum Flange Diameter and Location: 8.000 INCHES NOMINAL FIRST DRUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.