PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2584228
2584228 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A, case_style: RECESSED, seal_width: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, outside_diameter: 3.130 INCHES NOMINAL IN, surface_treatment: CADMIUM CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-169-1815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2584228
NSN: 5330-00-169-1815
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A
case_styleRECESSED
seal_width0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
outside_diameter3.130 INCHES NOMINAL IN
surface_treatmentCADMIUM CASE
housing_bore_diameter3.124 INCHES MINIMUM AND 3.126 INCHES MAXIMUM IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter2.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1516 FEET PER MINUTE FT
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE CASE
NSN5330-00-169-1815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2584228 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.130 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.124 INCHES MINIMUM AND 3.126 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT B
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.130 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.124 INCHES MINIMUM AND 3.126 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT B
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEALING ELEMENT STYLEANGULAR-OPPOSED
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A
ACCOMMODATED SHAFT DIAMETER2.125 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1516 FEET PER MINUTE FT
SEAL WIDTH0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
103HS 9/16 IN.Interchangeable
interchangeable cross-reference
interchangeable
712-046218Interchangeable
interchangeable cross-reference
interchangeable
B94.2Interchangeable
interchangeable cross-reference
interchangeable
21245Interchangeable
interchangeable cross-reference
interchangeable
212545Interchangeable
interchangeable cross-reference
interchangeable
SE-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2584228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2584228?
2584228 is a SEAL,PLAIN ENCASED.
What parts can replace 2584228?
There are 13 known substitutes for 2584228: 103HS 9/16 IN., 712-046218, B94.2 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2584228?
2584228 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-169-1815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2584228

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026