PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2579454-13
2579454-13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.281 INCHES NOMINAL IN, special_features: BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-0346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2579454-13
NSN: 5340-00-582-0346
FSC: 5340
CAGE: 07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
diameter0.128 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.281 INCHES NOMINAL IN
special_featuresBLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end0.509 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.337 INCHES NOMINAL IN
NSN5340-00-582-0346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2579454-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DIAMETER: 0.128 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
LOOP INSIDE DIAMETER: 0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.337 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DIAMETER0.128 INCHES NOMINAL IN
SPECIAL FEATURESBLACK
MATERIALPLASTIC POLYAMIDE NYLON BAND
LOOP INSIDE DIAMETER0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.337 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.281 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.509 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
240846Interchangeable
interchangeable cross-reference
interchangeable
7728419P19Interchangeable
interchangeable cross-reference
interchangeable
214M0089P024Interchangeable
interchangeable cross-reference
interchangeable
142-128Interchangeable
interchangeable cross-reference
interchangeable
08621-00023Interchangeable
interchangeable cross-reference
interchangeable
20133-125Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2579454-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2579454-13?
2579454-13 is a CLAMP,LOOP.
What parts can replace 2579454-13?
There are 6 known substitutes for 2579454-13: 240846, 7728419P19, 214M0089P024 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2579454-13?
2579454-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-0346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2579454-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026