2575649: WAVEGUIDE ASSEMBLY.
The WAVEGUIDE ASSEMBLY is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY SINGLE TUBING SEGMENT, flexibility: RIGID SINGLE TUBING SEGMENT, flange_depth: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM FIRST FLANGE IN, flange_style: COVER TYPE SECOND FLANGE, thread_class: 2B FIRST FLANGE SINGLE CONNECTION FACILITY, special_features: MTG BRACKET WITH TWO PANEL FASTENER ASSEMBLIES ATTACHED,LOCATED 1.844 IN. FROM CHOKE FLANGE END TO CENTER OFBRACKET IN.
This part is cataloged in the U.S. Government catalog under NSN 5985-01-023-7701, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY SINGLE TUBING SEGMENT |
| flexibility | RIGID SINGLE TUBING SEGMENT |
| flange_depth | 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM FIRST FLANGE IN |
| flange_style | COVER TYPE SECOND FLANGE |
| thread_class | 2B FIRST FLANGE SINGLE CONNECTION FACILITY |
| flange_quantity | 2 |
| special_features | MTG BRACKET WITH TWO PANEL FASTENER ASSEMBLIES ATTACHED,LOCATED 1.844 IN. FROM CHOKE FLANGE END TO CENTER OFBRACKET IN |
| style_designator | STRAIGHT TYPE |
| thread_direction | RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY |
| waveguide_length | 2.750 INCHES NOMINAL IN |
| surface_treatment | OXIDE FILM ALL FLANGE OUTSIDE SURFACES |
| operating_pressure | 20.0 POUNDS PER SQUARE INCH GAUGE (PSIG) MAXIMUM LBS |
| NSN | 5985-01-023-7701 |
| TUBING WALL CONSTRUCTION STYLE | SEAMLESS SINGLE TUBING SEGMENT |
| FLANGE INSIDE HEIGHT | 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM FIRST FLANGE IN |
| FLANGE INSIDE HEIGHT | 0.503 INCHES MINIMUM AND 0.506 INCHES MAXIMUM SECOND FLANGE IN |
| FLANGE QUANTITY | 2 |
| VOLTAGE STANDING WAVE RATIO | 1.04 |
| STYLE DESIGNATOR | STRAIGHT TYPE |
| FLEXIBILITY | RIGID SINGLE TUBING SEGMENT |
| FLANGE INSIDE DIAMETER | 1.406 INCHES MINIMUM AND 1.640 INCHES MAXIMUM FIRST FLANGE IN |
| FLANGE INSIDE DIAMETER | 1.406 INCHES MINIMUM AND 1.640 INCHES MAXIMUM SECOND FLANGE IN |
| WAVEGUIDE INSIDE WIDTH | 0.896 INCHES MINIMUM AND 0.904 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.