PartsTable
Technical Data Sheet
Download PDF

257347 — BEARING,WASHER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

257347: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 1.1270 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, corner_shape: SQUARE ALL CORNERS, outside_diameter: 1.3200 INCHES NOMINAL IN, style_designator: ROUND, overall_thickness: 0.0300 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-076-4409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
257347
NSN: 3110-00-076-4409
NIINs: 000764409, 010039605
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
diameter1.1270 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
corner_shapeSQUARE ALL CORNERS
outside_diameter1.3200 INCHES NOMINAL IN
style_designatorROUND
overall_thickness0.0300 INCHES NOMINAL IN
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN3110-00-076-4409
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 257347 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0010 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, CYLINDRICAL INNER RING, TWO LIP OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 72.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS
INTERNAL CLEARANCE0.0010 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, CYLINDRICAL INNER RING, TWO LIP OUTER RING, SEPARABLE
OVERALL WIDTH19.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER72.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER30.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 2
E1306UMRReference document
Same NSN cross-reference
Reference document — Secondary reference
R306ESame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 257347?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 257347?
257347 is a BEARING,WASHER,THRUST.
What parts can replace 257347?
There are 2 known substitutes for 257347: E1306UMR, R306E. Substitute compatibility should be verified for your specific system.
What is the NSN for 257347?
257347 is cataloged in the U.S. Government catalog under NSN 3110-00-076-4409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 257347