PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 25707-1
25707-1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The STRAINER ELEMENT,SEDIMENT is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: STRAINER, ELEMENT,SEDIMENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-382-4118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25707-1
NSN: 5315-01-382-4118
FSC: 5315
CAGE: 92878 — HDT EXPEDITIONARY SYSTEMS INC (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencySTRAINER, ELEMENT,SEDIMENT
NSN5315-01-382-4118
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 25707-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 2.4400 INCHES MINIMUM AND 2.5600 INCHES MAXIMUM IN
•
FIRST END LOCATION: THREADED END
•
THREAD DIRECTION: RIGHT-HAND
•
FIRST END STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A-36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SECOND END STYLE: SQUARE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
PIN OVERALL DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH2.4400 INCHES MINIMUM AND 2.5600 INCHES MAXIMUM IN
FIRST END LOCATIONTHREADED END
THREAD DIRECTIONRIGHT-HAND
FIRST END STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A-36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SECOND END STYLESQUARE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
PIN OVERALL DIAMETER0.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH4.0000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
25707Interchangeable
interchangeable cross-reference
interchangeable
25967Interchangeable
interchangeable cross-reference
interchangeable
A25707Interchangeable
interchangeable cross-reference
interchangeable
AP25707Interchangeable
interchangeable cross-reference
interchangeable
25-7071BInterchangeable
interchangeable cross-reference
interchangeable
25-7071Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25707-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25707-1?
25707-1 is a STRAINER ELEMENT,SEDIMENT.
What parts can replace 25707-1?
There are 6 known substitutes for 25707-1: 25707, 25967, A25707 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25707-1?
25707-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-382-4118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25707-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026