PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 25504P1
25504P1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.266 INCHES NOMINAL IN, height: 0.040 INCHES NOMINAL IN, length: 0.312 INCHES NOMINAL IN, hole_diameter: 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN, furnished_items: LOCKNUT, surface_treatment: PASSIVATE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-571-7827, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25504P1
NSN: 5340-00-571-7827
FSC: 5340
CAGE: 94117 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
width0.266 INCHES NOMINAL IN
height0.040 INCHES NOMINAL IN
length0.312 INCHES NOMINAL IN
hole_diameter0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
surface_treatmentPASSIVATE
NSN5340-00-571-7827
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25504P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.312 INCHES NOMINAL IN
•
HEIGHT: 0.040 INCHES NOMINAL IN
•
WIDTH: 0.266 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.312 INCHES NOMINAL IN
HEIGHT0.040 INCHES NOMINAL IN
WIDTH0.266 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
S3104Y-C023Upgraded Successor
successor cross-reference
successor
YC3-1SUpgraded Successor
successor cross-reference
successor
918354-1Upgraded Successor
successor cross-reference
successor
B107.410 CAT 48 TY1CL2Interchangeable
interchangeable cross-reference
interchangeable
C-23Interchangeable
interchangeable cross-reference
interchangeable
A-A-2475Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25504P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25504P1?
25504P1 is a CLAMP,SYNCHRO.
What parts can replace 25504P1?
There are 13 known substitutes for 25504P1: S3104Y-C023, YC3-1S, 918354-1 and 10 more. Substitute compatibility should be verified for your specific system.
Is 25504P1 still available?
25504P1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25504P1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026