PartsTable
Technical Data Sheet
Download PDF

2545922-1 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2545922-1: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, length: 0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.139 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN, overall_height: 0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-242-7670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2545922-1
NSN: 5340-00-242-7670
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
length0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.139 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
overall_height0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
loop/holding_dimension0.750 INCHES NOMINAL IN
distance_from_loop_center_to_end0.450 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-242-7670
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2545922-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.450 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
LENGTH0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.450 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
100-200-12-36Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6018-44AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2545922-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2545922-1?
2545922-1 is a CLIP,SPRING TENSION.
What parts can replace 2545922-1?
There are 2 known substitutes for 2545922-1: 100-200-12-36, 6018-44A. Substitute compatibility should be verified for your specific system.
What is the NSN for 2545922-1?
2545922-1 is cataloged in the U.S. Government catalog under NSN 5340-00-242-7670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2545922-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.