PartsTable
Technical Data Sheet
Download PDF

253871 PC 3 — COVER,ELECTRICAL CONNECTOR

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

253871 PC 3: COVER,ELECTRICAL CONNECTOR.

The COVER,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include height: 12.000 INCHES NOMINAL IN, material: COPPER ALLOY, outside_diameter: 6.494 INCHES MINIMUM AND 6.499 INCHES MAXIMUM IN, attachment_method: BOLTS, valve_size_for_which_designed: 10.000 INCHES IN, valve_type_for_which_designed: GATE. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-468-8363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
253871 PC 3
NSN: 4820-01-468-8363
FSC: 4820 — Valves, Nonpowered
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
height12.000 INCHES NOMINAL IN
materialCOPPER ALLOY
outside_diameter6.494 INCHES MINIMUM AND 6.499 INCHES MAXIMUM IN
attachment_methodBOLTS
valve_size_for_which_designed10.000 INCHES IN
valve_type_for_which_designedGATE
material_document_and_classificationMIL-B-21230 ALLOY 1 MOD TO 4 TO 5L5 % NI MIL SPEC SINGLE MATERIAL RESPONSE
valve_model_number_for_which_designedNNPN2647288
NSN4820-01-468-8363
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 253871 PC 3 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VALVE TYPE FOR WHICH DESIGNED: GATE
•
VALVE MODEL NUMBER FOR WHICH DESIGNED: NNPN2647288
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-21230 ALLOY 1 MOD TO 4 TO 5L5 % NI MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 6.494 INCHES MINIMUM AND 6.499 INCHES MAXIMUM IN
•
VALVE SIZE FOR WHICH DESIGNED: 10.000 INCHES IN
•
HEIGHT: 12.000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
•
ATTACHMENT METHOD: BOLTS
TECHNICAL CHARACTERISTICS
VALVE TYPE FOR WHICH DESIGNEDGATE
VALVE MODEL NUMBER FOR WHICH DESIGNEDNNPN2647288
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-21230 ALLOY 1 MOD TO 4 TO 5L5 % NI MIL SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER6.494 INCHES MINIMUM AND 6.499 INCHES MAXIMUM IN
VALVE SIZE FOR WHICH DESIGNED10.000 INCHES IN
HEIGHT12.000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
ATTACHMENT METHODBOLTS
SUBSTITUTES & CROSS-REFERENCES 1
253871Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 253871 PC 3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 253871 PC 3?
253871 PC 3 is a COVER,ELECTRICAL CONNECTOR.
What parts can replace 253871 PC 3?
There is 1 known substitute for 253871 PC 3: 253871. Substitute compatibility should be verified for your specific system.
What is the NSN for 253871 PC 3?
253871 PC 3 is cataloged in the U.S. Government catalog under NSN 4820-01-468-8363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 253871 PC 3