PartsTable
Technical Data Sheet
Download PDF

2533405-253 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2533405-253: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 5.336 INCHES MINIMUM AND 5.382 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-405-0797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2533405-253
NSN: 5331-00-405-0797
FSC: 5331 — O-ring
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter5.336 INCHES MINIMUM AND 5.382 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationGUIDED MISSILE LAUNCHING SYSTEM, MK 26 (GMLS); KIDD CLASS DDG; ARLEIGH BURKE CLASS DDG; TICONDEROGA CLASS CG (47); VIRGINIA CLASS CGN (41); GUN, 5-IN./54 CAL, MK-42 & 45; SPRUANCE CLASS DD (963)
NSN5331-00-405-0797
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2533405-253 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 5.336 INCHES MINIMUM AND 5.382 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER5.336 INCHES MINIMUM AND 5.382 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONGUIDED MISSILE LAUNCHING SYSTEM, MK 26 (GMLS); KIDD CLASS DDG; ARLEIGH BURKE CLASS DDG; TICONDEROGA CLASS CG (47); VIRGINIA CLASS CGN (41); GUN, 5-IN./54 CAL, MK-42 & 45; SPRUANCE CLASS DD (963)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 3
2-253N304-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
5331PL0891459Reference document
Same NSN cross-reference
Reference document — Informative reference only
5331PL1280048Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2533405-253?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2533405-253?
2533405-253 is a O-RING.
What parts can replace 2533405-253?
There are 3 known substitutes for 2533405-253: 2-253N304-70, 5331PL0891459, 5331PL1280048. Substitute compatibility should be verified for your specific system.
What is the NSN for 2533405-253?
2533405-253 is cataloged in the U.S. Government catalog under NSN 5331-00-405-0797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2533405-253

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.