2533405-150 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2533405-150: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN, center_hole_diameter: 2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-099-8041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2533405-150

NSN: 5331-00-099-8041
FSC: 5331 — O-ring
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
center_hole_diameter	2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-099-8041

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 6

CM1-150-B46AReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-150N219-7Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CM1-150-B46Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-150N674-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

CI-0150Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

01-435-0366-4 3M4183A ITEM 109Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2533405-150?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2533405-150?

2533405-150 is a O-RING.

What parts can replace 2533405-150?

There are 6 known substitutes for 2533405-150: CM1-150-B46A, 2-150N219-7, CM1-150-B46 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2533405-150?

2533405-150 is cataloged in the U.S. Government catalog under NSN 5331-00-099-8041. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2533405-150 — O-RING

Request a Quote — 2533405-150