PartsTable
Technical Data Sheet
Download PDF

2532125 — 2532125

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2532125: 2532125.

The 2532125 is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020, overall_length: 2.000 INCHES NOMINAL IN, overall_thickness: 0.125 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: SHIM. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-925-2548, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2532125
NSN: 5330-00-925-2548
NIINs: 009252548, 015948101
FSC: 5330 — Packing and Gasket Materials
CAGE: F0851 — GENEMAT (STE GLE DE MATERIELS D'ENTREPRISES) SA (FRA)
SPECIFICATIONS
materialSTEEL COMP 1020
overall_length2.000 INCHES NOMINAL IN
overall_thickness0.125 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencySHIM
NSN5330-00-925-2548
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2532125 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.188 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HOUSING BORE DIAMETER: 2.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66,AISI/SAE 1010 TO 1020 FED STD SINGLE MATERIAL RESPONSE CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.188 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HOUSING BORE DIAMETER2.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66,AISI/SAE 1010 TO 1020 FED STD SINGLE MATERIAL RESPONSE CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
SURFACE TREATMENTZINC CASE
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 3
71X6242Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
97445023Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
42602Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 2532125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2532125?
2532125 is a 2532125.
What parts can replace 2532125?
There are 3 known substitutes for 2532125: 71X6242, 97445023, 42602. Substitute compatibility should be verified for your specific system.
What is the NSN for 2532125?
2532125 is cataloged in the U.S. Government catalog under NSN 5330-00-925-2548. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2532125

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.