PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 25317
25317 ✓ Verified by PartsTable
Clementoni · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

VALVE,FUEL PRESSURIZING AND DRAI. Key specifications include end_item_identification: ALLIED MARINE CRANE HYDRAULIC CYLINDER (6X22). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-026-0141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25317
NSN: 5315-00-026-0141
FSC: 5315
CAGE: 92878 — HDT EXPEDITIONARY SYSTEMS INC (USA)
SPECIFICATIONS
end_item_identificationALLIED MARINE CRANE HYDRAULIC CYLINDER (6X22)
NSN5315-00-026-0141
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 25317 · Clementoni ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
MATERIAL: STEEL COMP 1010 OVERALL
•
UNDERCUT RADIUS: 0.015 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
EFFECTIVE LENGTH: 0.863 INCHES MINIMUM AND 0.883 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.030 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
DIAMETER: 0.091 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
MATERIALSTEEL COMP 1010 OVERALL
UNDERCUT RADIUS0.015 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
EFFECTIVE LENGTH0.863 INCHES MINIMUM AND 0.883 INCHES MAXIMUM IN
UNDERCUT WIDTH0.030 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
DIAMETER0.091 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
STYLE DESIGNATORGROOVE
FEATURES PROVIDEDCASEHARDENED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
3019359Interchangeable
interchangeable cross-reference
interchangeable
24447Interchangeable
interchangeable cross-reference
interchangeable
3014716Interchangeable
interchangeable cross-reference
interchangeable
AS5176Interchangeable
interchangeable cross-reference
interchangeable
AS5176J04Interchangeable
interchangeable cross-reference
interchangeable
4730PL0633128Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25317?
25317 is a VALVE,FUEL PRESSURIZING AND DRAI manufactured by Clementoni.
What parts can replace 25317?
There are 9 known substitutes for 25317: 3019359, 24447, 3014716 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25317?
25317 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-026-0141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25317

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026