PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2530007374988
2530007374988 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: RECESSED, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 2.286 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-4988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2530007374988
NSN: 5330-00-737-4988
FSC: 5330
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleRECESSED
seal_width0.500 INCHES NOMINAL IN
outside_diameter2.286 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.375 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.250 INCHES NOMINAL IN
NSN5330-00-737-4988
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2530007374988 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 1.375 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 2.286 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL CASE
•
CASE STYLE: RECESSED
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER1.375 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER2.286 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
CASE STYLERECESSED
SEAL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
7242Interchangeable
interchangeable cross-reference
interchangeable
2193039Interchangeable
interchangeable cross-reference
interchangeable
13710Interchangeable
interchangeable cross-reference
interchangeable
13710 SPRINGInterchangeable
interchangeable cross-reference
interchangeable
072421Interchangeable
interchangeable cross-reference
interchangeable
1100-2BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2530007374988?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2530007374988?
2530007374988 is a SEAL,PLAIN ENCASED.
What parts can replace 2530007374988?
There are 21 known substitutes for 2530007374988: 7242, 2193039, 13710 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2530007374988?
2530007374988 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-4988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2530007374988

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026