The Arm,steering Gear, cataloged under National Stock Number 2530-01-003-9421, is classified within Federal Supply Class 2530 (Vehicular Brake, Steering, Axle, Wheel, and Track Components) of the Vehicular Equipment Components group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2530-01-003-9421 |
| Item Name | Arm,steering Gear |
| FSC / FSG | 2530 / 25 — Vehicular Brake, Steering, Axle, Wheel, and Track Components |
| Status | ACTIVE |
| Drag Link End Characteristic | W/BALL STUD BORE |
| Sector Shaft Mounting End Overall Thickness | 0.875 INCHES NOMINAL IN |
| Taper | 0.750 PER FOOT IN INCHES NOMINAL |
| Teeth Quantity | 32 |
| Bore Length | 0.688 INCHES NOMINAL IN |
| Sector Shaft Mounting End Overall Width | 2.156 INCHES NOMINAL IN |
| Design Type | OFFSET |
| Serration Included Angle in Deg | 74.5 |
| Sector Shaft Mounting End Serrated Bore | INCLUDED |
| Small End Major Diameter | 1.062 INCHES NOMINAL IN |
| Teeth Cut Angle in Deg | ANY ACCEPTABLE |
| Taper Length | 0.875 INCHES NOMINAL IN |
| Bore Smallest Diameter | 0.625 INCHES NOMINAL IN |
| Center to Center Distance Between Ball/ball Stud Hole and Sector Shaft Bore | 5.625 INCHES NOMINAL IN |
| Counterbore Feature | NOT INCLUDED |
| Small End Teeth Depth | 1.062 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3492213 | 3/2 Design control — primary reference U.S. Government activity |
NSN 2530-01-003-9421 is a Arm,steering Gear, classified under FSC 2530, Vehicular Brake, Steering, Axle, Wheel, and Track Components. Status: active.
Key specifications for 2530-01-003-9421: Drag Link End Characteristic: W/BALL STUD BORE; Sector Shaft Mounting End Overall Thickness: 0.875 INCHES NOMINAL IN; Taper: 0.750 PER FOOT IN INCHES NOMINAL; Teeth Quantity: 32. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.