The Arm,steering Gear, cataloged under National Stock Number 2530-00-980-8606, is classified within Federal Supply Class 2530 (Vehicular Brake, Steering, Axle, Wheel, and Track Components) of the Vehicular Equipment Components group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2530-00-980-8606 |
| Item Name | Arm,steering Gear |
| FSC / FSG | 2530 / 25 — Vehicular Brake, Steering, Axle, Wheel, and Track Components |
| Status | ACTIVE |
| Drag Link End Characteristic | W/BALL STUD BORE |
| Sector Shaft Mounting End Overall Thickness | 0.623 INCHES NOMINAL IN |
| Bore Length | 0.666 INCHES NOMINAL IN |
| Sector Shaft Mounting End Overall Width | 0.666 INCHES NOMINAL IN |
| Design Type | OFFSET |
| Sector Shaft Mounting End Serrated Bore | NOT INCLUDED |
| Criticality Code Justification | FEAT |
| Taper Length | 1.500 INCHES NOMINAL IN |
| Bore Smallest Diameter | 0.406 INCHES NOMINAL IN |
| Center to Center Distance Between Ball/ball Stud Hole and Sector Shaft Bore | 6.500 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| QV6145-1 | 5/9 Secondary reference Lift Parts Mfg Co Inc Div of Echlin Mfg Co the |
| 26249-6145-1 | 5/9 Secondary reference U.S. Government activity |
| 26249-6145-1 | 3/9 Design control — primary reference Steelmasters of Columbus Inc |
NSN 2530-00-980-8606 is a Arm,steering Gear, classified under FSC 2530, Vehicular Brake, Steering, Axle, Wheel, and Track Components. Status: active.
Key specifications for 2530-00-980-8606: Drag Link End Characteristic: W/BALL STUD BORE; Sector Shaft Mounting End Overall Thickness: 0.623 INCHES NOMINAL IN; Bore Length: 0.666 INCHES NOMINAL IN; Sector Shaft Mounting End Overall Width: 0.666 INCHES NOMINAL IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.