The Cup,hydraulic Brake Cylinder, cataloged under National Stock Number 2530-00-741-0841, is classified within Federal Supply Class 2530 (No Item Name Available) of the Vehicular Equipment Components group. The primary manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 16 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 7 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2530-00-741-0841 |
| Primary Part Number | 7410841 |
| Item Name | Cup,hydraulic Brake Cylinder |
| FSC / FSG | 2530 / 25 — No Item Name Available |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Largest Outside Diameter | 1.1075 INCHES MINIMUM AND 1.1275 INCHES MAXIMUM IN |
| Base Thickness | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Sealing Lip Length | 0.188 INCHES NOMINAL IN |
| Outer Periphery Base Groove | NOT INCLUDED |
| Material | RUBBER SYNTHETIC |
| FSC Application Data | VEHICULAR BRAKE CYLINDER |
| Material Document and Classification | -2341, MILLER RUBBER CO MFR REF SINGLE MATERIAL RESPONSE |
| Base Outside Diameter | 0.0325 INCHES MINIMUM AND 1.0125 INCHES MAXIMUM IN |
| Base Inside Projection | NOT INCLUDED |
| Feathered Lip Feature | INCLUDED |
| Mounting Method | CENTER HOLE |
| Thru-Hole Length | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Tapered Hole Minor Diameter | 0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN |
| Tapered Hole Major Diameter | 0.721 INCHES MINIMUM AND 0.731 INCHES MAXIMUM IN |
| Angle in Deg | 24.0 |
| Cup Protector | NOT INCLUDED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 7410841 | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| 2279730 | General Motors Llc Dba General Motors Llc (USA) |
| 2279730 | Military Vehicles Opn General Motors Truck and Bus Group Ms 2603-02 (USA) |
| 22G9730 | General Motors Llc Dba General Motors Llc (USA) |
| 47548 | Tiffin Parts, L.l.c. Div Subsidiary of Pettibone Corp. (USA) |
| 22G9730 | Military Vehicles Opn General Motors Truck and Bus Group Ms 2603-02 (USA) |
| 375833 | Bendix Corp the Brake and Steering Div (USA) |
NSN 2530-00-741-0841 is a Cup,hydraulic Brake Cylinder, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 2530 (No Item Name Available). Status: active.
NSN 2530-00-741-0841 has 7 cross-referenced part numbers: 7410841 (U S Army Tank Automotive Command Amsta-Im-Mm), 2279730 (General Motors Llc Dba General Motors Llc), 2279730 (Military Vehicles Opn General Motors Truck and Bus Group Ms 2603-02), 22G9730 (General Motors Llc Dba General Motors Llc), 47548 (Tiffin Parts, L.l.c. Div Subsidiary of Pettibone Corp.) and 2 more.
There are 6 known substitutes for 2530-00-741-0841: 5133-00-010-4005, 5977-00-570-9396, 5950-00-645-2916 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for 7410841: Largest Outside Diameter: 1.1075 INCHES MINIMUM AND 1.1275 INCHES MAXIMUM IN; Base Thickness: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN; Sealing Lip Length: 0.188 INCHES NOMINAL IN; Overall Length: 0.281 INCHES NOMINAL IN. 17 total characteristics are documented in the Federal Logistics Information System.