The Steering Gear, cataloged under National Stock Number 2530-00-101-1701, is classified within Federal Supply Class 2530 (Vehicular Brake, Steering, Axle, Wheel, and Track Components) of the Vehicular Equipment Components group. The manufacturer of record is Linear Motion Llc Div Ugm. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2530-00-101-1701 |
| Primary Part Number | 5670205 |
| Item Name | Steering Gear |
| FSC / FSG | 2530 / 25 — Vehicular Brake, Steering, Axle, Wheel, and Track Components |
| Manufacturer | Linear Motion Llc Div Ugm |
| Status | ACTIVE |
| Steering Wheel | NOT INCLUDED |
| Taper | 0.623 PER FOOT IN INCHES NOMINAL |
| Steering Arm Ball Turning Direction | AWAY FROM HOUSING |
| Design Type | WORM-FOUR TOOTH SECTOR |
| Steering Wheel Shaft Tube | INCLUDED |
| Diameter | 1.750 INCHES NOMINAL IN |
| Steering Arm Shaft Centerline to Steering Wheel Shaft End Distance | 33.440 INCHES NOMINAL IN |
| Gear Ratio | 19.8 TO 1 |
| Horn Button | NOT INCLUDED |
| Ball Diameter | 0.747 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN |
| Wheel Shaft Centerline to Ball Stud Centerline Distance | 6.940 INCHES NOMINAL IN |
| Arm Shaft Centerline to Ball Stud Centerline Distance | 6.000 INCHES NOMINAL IN |
| Steering Wheel Shaft Centerline to Steering Arm Shaft End Distance | 2.250 INCHES NOMINAL IN |
| Maximum Travel in Deg | 47 DEGREES,4 MINUTES |
| Horn Cable | NOT INCLUDED |
| Steering Arm Type | OFFSET |
| Major Diameter | 0.873 INCHES NOMINAL IN |
| Steering Arm | INCLUDED |
| Power Actuation Design Feature | NOT INCLUDED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 5670205 | Linear Motion Llc Div Ugm (USA) |
| Reference | Meaning |
|---|---|
| 664877 | 5/9 Secondary reference Clark Equipment Co |
| 664877 | 3/2 Design control — primary reference U.S. Government activity |
| 5670205 | 5/9 Secondary reference General Motors Corp Saginaw Div |
NSN 2530-00-101-1701 is a Steering Gear, manufactured by Linear Motion Llc Div Ugm, classified under FSC 2530, Vehicular Brake, Steering, Axle, Wheel, and Track Components. Status: active.
NSN 2530-00-101-1701 has 1 manufacturer part number on file: 5670205 (Linear Motion Llc Div Ugm).
Key specifications for 5670205: Steering Wheel: NOT INCLUDED; Taper: 0.623 PER FOOT IN INCHES NOMINAL; Steering Arm Ball Turning Direction: AWAY FROM HOUSING; Design Type: WORM-FOUR TOOTH SECTOR. 19 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.