PartsTable
Technical Data Sheet
PartsTable / MRO / 252960
252960 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL COMP 302, body_style: PANEL MOUNTED, body_width: 0.780 INCHES NOMINAL IN, cone_width: 0.7813 INCHES NOMINAL IN, body_height: 0.605 INCHES MAXIMUM IN, construction: LAMINATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 252960
NSN: 3110-00-100-3135
FSC: 3110
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialSTEEL COMP 302
body_stylePANEL MOUNTED
body_width0.780 INCHES NOMINAL IN
cone_width0.7813 INCHES NOMINAL IN
body_height0.605 INCHES MAXIMUM IN
constructionLAMINATED
bore_diameter0.8125 INCHES NOMINAL IN
actuator_styleRECTANGULAR
mounting_methodPANEL
outside_diameter1.630 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter1.400 INCHES NOMINAL IN
NSN3110-00-100-3135
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 252960 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
BORE DIAMETER: 0.8125 INCHES NOMINAL IN
•
CONE WIDTH: 0.7813 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
BORE DIAMETER0.8125 INCHES NOMINAL IN
CONE WIDTH0.7813 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
1402-2-1Interchangeable
interchangeable cross-reference
interchangeable
BACT42C22-1Interchangeable
interchangeable cross-reference
interchangeable
200-1402-33-01-0Interchangeable
interchangeable cross-reference
interchangeable
8777355-1Interchangeable
interchangeable cross-reference
interchangeable
4651Interchangeable
interchangeable cross-reference
interchangeable
11011102Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 252960?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 252960?
252960 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 252960?
There are 20 known substitutes for 252960: 1402-2-1, BACT42C22-1, 200-1402-33-01-0 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 252960?
252960 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 252960

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026