PartsTable TECHNICAL DATA SHEET
NSN 2520-00-678-3109Government record, cited

Yoke, Universal Joint, Vehicular2520-00-678-3109

NSN 2520-00-678-3109 · NIIN 006783109 · Part number 2-82-501
Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products · FSC 2520 — Vehicular Power Transmission Components · FSG 25 — Vehicular Equipment Components · CAGE 72447
Government record, cited
NSN 2520-00-678-3109 — this item is cataloged by the U.S. Government under National Stock Number 2520-00-678-3109. Manufacturer of record part number: 2-82-501.
Also searched as  2520-00-678-3109 · 2520006783109 · NIIN 006783109 · 00-678-3109 · FSC 2520 Vehicular Power Transmission Components · CAGE 72447 · 2-82-501 · 2520006783109 · 7340695
Nearby stock numbers  ·
Features
  • Yoke,universal Joint,vehicular — FSC 2520
  • Fork Height: 3.440 INCHES NOMINAL IN
  • Hub End Thread Provision: THREADED
  • Shaft End Spline Type: INVOLUTE
  • Outside Diameter: 2.247 INCHES MINIMUM AND 2.252 INCHES MAXIMUM IN
  • Connection End Type: FLANGE OR HUB
  • 2 manufacturer part numbers on file
  • Manufacturer of record: Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products
Identification
  • NSN: 2520-00-678-3109
  • NIIN: 006783109
  • FSC: 2520 — Vehicular Power Transmission Components
  • FSG: 25 — Vehicular Equipment Components
  • Primary part number: 2-82-501
  • Manufacturer: Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products
General Description

The Yoke,universal Joint,vehicular, cataloged under National Stock Number 2520-00-678-3109, is classified within Federal Supply Class 2520 (Vehicular Power Transmission Components) of the Vehicular Equipment Components group. The manufacturer of record is Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN2520-00-678-3109
Primary Part Number2-82-501
Item NameYoke,universal Joint,vehicular
FSC / FSG2520 / 25 — Vehicular Power Transmission Components
ManufacturerDana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products
StatusACTIVE
Fork Height3.440 INCHES NOMINAL IN
Hub End Thread ProvisionTHREADED
Shaft End Spline TypeINVOLUTE
Outside Diameter2.247 INCHES MINIMUM AND 2.252 INCHES MAXIMUM IN
Connection End TypeFLANGE OR HUB
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
2-82-501 PRIMARY Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products (USA)
7340695 U S Army Tank Automotive Command Amsta-Im-Mm (USA)
Reference documents
ReferenceMeaning
2-82-501 5/9 Secondary reference
Spalla Inc
2520006783109 6/9 Informative reference only
E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales

Frequently Asked Questions

What is NSN 2520-00-678-3109?

NSN 2520-00-678-3109 is a Yoke,universal Joint,vehicular, manufactured by Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products, classified under FSC 2520, Vehicular Power Transmission Components. Status: active.

What part numbers are listed for NSN 2520-00-678-3109?

NSN 2520-00-678-3109 has 2 manufacturer part numbers on file: 2-82-501 (Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products), 7340695 (U S Army Tank Automotive Command Amsta-Im-Mm).

What are the specifications of 2-82-501?

Key specifications for 2-82-501: Fork Height: 3.440 INCHES NOMINAL IN; Hub End Thread Provision: THREADED; Shaft End Spline Type: INVOLUTE; Outside Diameter: 2.247 INCHES MINIMUM AND 2.252 INCHES MAXIMUM IN. 5 specifications are documented in the U.S. Government catalog.

Is NSN 2520-00-678-3109 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com