The Shaft,axle,automotive, cataloged under National Stock Number 2520-01-080-4704, is classified within Federal Supply Class 2520 (Vehicular Power Transmission Components) of the Vehicular Equipment Components group. The manufacturer of record is Oshkosh Defense Llc. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2520-01-080-4704 |
| Primary Part Number | 60929CX |
| Item Name | Shaft,axle,automotive |
| FSC / FSG | 2520 / 25 — Vehicular Power Transmission Components |
| Manufacturer | Oshkosh Defense Llc |
| Status | ACTIVE |
| Second End Type | TAPERED |
| First End Pitch Diameter | 2.280 INCHES NOMINAL IN |
| First End Type | SPLINED |
| First End Spline Major Diameter | 2.367 INCHES MINIMUM AND 2.377 INCHES MAXIMUM IN |
| First End Spline Pressure Angle in Deg | 29.0 |
| First End Spline Quantity | 24 |
| Material Document and Classification | SAE 4340 ASSN STD SINGLE MATERIAL RESPONSE |
| First End Spline Length | 2.620 INCHES NOMINAL IN |
| First End Spline Type | STRAIGHT |
| First End Spline Minor Diameter | 2.234 INCHES MINIMUM AND 2.244 INCHES MAXIMUM IN |
| Material | STEEL COMP 4340 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
NSN 2520-01-080-4704 is a Shaft,axle,automotive, manufactured by Oshkosh Defense Llc, classified under FSC 2520, Vehicular Power Transmission Components. Status: active.
NSN 2520-01-080-4704 has 2 manufacturer part numbers on file: 60929-C (Oshkosh Defense Llc), 60929CX (Oshkosh Defense Llc).
Key specifications for 60929CX: Second End Type: TAPERED; First End Pitch Diameter: 2.280 INCHES NOMINAL IN; First End Type: SPLINED; First End Spline Major Diameter: 2.367 INCHES MINIMUM AND 2.377 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.