PartsTable TECHNICAL DATA SHEET
NSN 2520-00-891-0397Government record, cited

Shaft, Axle, Automotive2520-00-891-0397

NSN 2520-00-891-0397 · NIIN 008910397
FSC 2520 — Vehicular Power Transmission Components · FSG 25 — Vehicular Equipment Components
Government record, cited
Also searched as  2520-00-891-0397 · 2520008910397 · NIIN 008910397 · 00-891-0397 · FSC 2520 Vehicular Power Transmission Components
Nearby stock numbers  ·
Features
  • Shaft,axle,automotive — FSC 2520
  • Second End Type: SPLINED
  • First End Type: SPLINED
  • First End Facility Diameter: 0.785 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
  • First End Spline Major Diameter: 1.130 INCHES MINIMUM AND 1.136 INCHES MAXIMUM IN
  • Second End Spline Quantity: 10
  • Second End Spline Minor Diameter: 0.904 INCHES MINIMUM AND 0.909 INCHES MAXIMUM IN
  • Second End Bearing Seat: NOT INCLUDED
Identification
  • NSN: 2520-00-891-0397
  • NIIN: 008910397
  • FSC: 2520 — Vehicular Power Transmission Components
  • FSG: 25 — Vehicular Equipment Components
General Description

The Shaft,axle,automotive, cataloged under National Stock Number 2520-00-891-0397, is classified within Federal Supply Class 2520 (Vehicular Power Transmission Components) of the Vehicular Equipment Components group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN2520-00-891-0397
Item NameShaft,axle,automotive
FSC / FSG2520 / 25 — Vehicular Power Transmission Components
StatusACTIVE
Second End TypeSPLINED
First End TypeSPLINED
First End Facility Diameter0.785 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
First End Spline Major Diameter1.130 INCHES MINIMUM AND 1.136 INCHES MAXIMUM IN
Second End Spline Quantity10
Second End Spline Minor Diameter0.904 INCHES MINIMUM AND 0.909 INCHES MAXIMUM IN
Second End Bearing SeatNOT INCLUDED
First End Facility Width0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
Second End Spline Major Diameter1.122 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
First End Spline Quantity6
First End Facility Location0.231 IN. FROM SHAFT END IN
Material Document and ClassificationQQ-S-624-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
First End Spline Length1.219 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN
First End Spline TypeSTRAIGHT
Second End Spline TypeSTRAIGHT
First End Spline Minor Diameter0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
MaterialSTEEL
First End Engaging/locking/positioning FacilityLOCKING DEVICE GROOVE
First End Bearing SeatNOT INCLUDED
Metallic Hardness Rating38.0 MINIMUM ROCKWELL C AND 42.0 MAXIMUM ROCKWELL C
Second End Spline Length1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
63C52587-13 3/9 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 2520 — Vehicular Power Transmission Components
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
2520-00-005-4937
CLUTCH PACKAGE
2520-00-006-6257
2520-00-006-6257 · Item name not on file
2520-00-008-9977
SPIDER,UNIVERSAL JOINT,VEHICULAR
2520-00-039-6567
SOCKET
2520-00-242-3316
CLUTCH ASSEMBLY,HUB
2520-00-358-3905
COVER
2520-00-366-7191
COLLAR,SHAFT LINKAGE
2520-00-708-6603
COVER CONTROL LEVER

Frequently Asked Questions

What is NSN 2520-00-891-0397?

NSN 2520-00-891-0397 is a Shaft,axle,automotive, classified under FSC 2520, Vehicular Power Transmission Components. Status: active.

What are the specifications of 2520-00-891-0397?

Key specifications for 2520-00-891-0397: Second End Type: SPLINED; First End Type: SPLINED; First End Facility Diameter: 0.785 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN; First End Spline Major Diameter: 1.130 INCHES MINIMUM AND 1.136 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.

Is NSN 2520-00-891-0397 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 2520-00-891-0397?

NSN 2520-00-891-0397 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com