The Shaft,axle,automotive, cataloged under National Stock Number 2520-00-737-2867, is classified within Federal Supply Class 2520 (No Item Name Available) of the Vehicular Equipment Components group. The primary manufacturer of record is Am General Llc. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 2520-00-737-2867 |
| Primary Part Number | A1727 |
| Item Name | Shaft,axle,automotive |
| FSC / FSG | 2520 / 25 — No Item Name Available |
| Manufacturer | Am General Llc |
| Status | CANCELLED |
| Second End Type | SPLINED |
| Second End Spline Major Diameter | 1.113 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN |
| Second End Spline Length | 1.688 INCHES NOMINAL IN |
| First End Engaging/locking/positioning Facility | LOCKING DEVICE GROOVE AND SHOULDER |
| Material | STEEL COMP 4137 |
| Material Document and Classification | SAE 4137 ASSN STD SINGLE MATERIAL RESPONSE |
| First End Spline Length | 1.375 INCHES NOMINAL IN |
| First End Spline Major Diameter | 1.130 INCHES MINIMUM AND 1.136 INCHES MAXIMUM IN |
| First End Facility Width | 0.033 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN |
| Second End Bearing Seat Diameter | 1.190 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN |
| Second End Spline Quantity | 10 |
| Second End Bearing Seat Width | 0.875 INCHES NOMINAL IN |
| First End Facility Diameter | 1.090 INCHES MINIMUM AND 1.095 INCHES MAXIMUM IN |
| First End Type | SPLINED |
| First End Spline Quantity | 6 |
| First End Spline Minor Diameter | 0.950 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN |
| Second End Distance From Bearing Seat to End | 2.813 INCHES NOMINAL IN |
| Second End Spline Minor Diameter | 0.915 INCHES MINIMUM AND 0.957 INCHES MAXIMUM IN |
| First End Spline Type | STRAIGHT |
| Metallic Hardness Rating | 38.0 MINIMUM ROCKWELL C AND 43.0 MAXIMUM ROCKWELL C |
| First End Bearing Seat | NOT INCLUDED |
| Second End Bearing Seat | INCLUDED |
| First End Facility Location | LOCATED 1.303 IN. MIN 1.317 IN. MAX FROM SHAFT END,@2.391 IN. FROM SHAFT END IN |
| Second End Spline Type | STRAIGHT |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
NSN 2520-00-737-2867 is a Shaft,axle,automotive, manufactured by Am General Llc, classified under FSC 2520 (No Item Name Available). Status: cancelled.
NSN 2520-00-737-2867 has 2 cross-referenced part numbers: A1727 (Am General Llc), 7372867 (U S Army Tank Automotive Command Amsta-Im-Mm).
There are 6 known substitutes for 2520-00-737-2867: 5999-00-240-4323, 5325-01-066-1987, 8455-01-528-8908 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for A1727: Second End Type: SPLINED; Second End Spline Major Diameter: 1.113 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN; Second End Spline Length: 1.688 INCHES NOMINAL IN; First End Engaging/locking/positioning Facility: LOCKING DEVICE GROOVE AND SHOULDER. 26 total characteristics are documented in the Federal Logistics Information System.
NSN 2520-00-737-2867 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.