The Shaft,axle,automotive, cataloged under National Stock Number 2520-00-457-8465, is classified within Federal Supply Class 2520 (Vehicular Power Transmission Components) of the Vehicular Equipment Components group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2520-00-457-8465 |
| Item Name | Shaft,axle,automotive |
| FSC / FSG | 2520 / 25 — Vehicular Power Transmission Components |
| Status | ACTIVE |
| First End Bearing Seat Diameter | 1.560 INCHES NOMINAL IN |
| Mounting Facility Type and Quantity | 5 UNTHREADED HOLE(S) |
| Second End Type | SPLINED |
| First End Type | FLANGED |
| First End Bearing Seat Width | 2.250 INCHES NOMINAL IN |
| Second End Spline Quantity | 30 |
| Second End Bearing Seat | NOT INCLUDED |
| Flange Thickness at Mounting Hole | 0.450 INCHES NOMINAL IN |
| Second End Spline Pressure Angle in Deg | 12.0 |
| First End Distance From Bearing Seat to End | 3.000 INCHES NOMINAL IN |
| Flange Overall Thickness | 1.090 INCHES NOMINAL IN |
| Second End Spline Type | INVOLUTE |
| Material | STEEL |
| Flange Outside Diameter | 6.000 INCHES NOMINAL IN |
| First End Bearing Seat | INCLUDED |
| Second End Pitch Diameter | 1.225 INCHES NOMINAL IN |
| Hole Diameter | 0.655 INCHES NOMINAL IN |
| Second End Spline Length | 1.400 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2585550 | 3/9 Design control — primary reference U.S. Government activity |
NSN 2520-00-457-8465 is a Shaft,axle,automotive, classified under FSC 2520, Vehicular Power Transmission Components. Status: active.
Key specifications for 2520-00-457-8465: First End Bearing Seat Diameter: 1.560 INCHES NOMINAL IN; Mounting Facility Type and Quantity: 5 UNTHREADED HOLE(S); Second End Type: SPLINED; First End Type: FLANGED. 18 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.