The Shaft,axle,automotive, cataloged under National Stock Number 2520-00-229-5358, is classified within Federal Supply Class 2520 (Vehicular Power Transmission Components) of the Vehicular Equipment Components group. The manufacturer of record is Am General Llc. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2520-00-229-5358 |
| Primary Part Number | 933365 |
| Item Name | Shaft,axle,automotive |
| FSC / FSG | 2520 / 25 — Vehicular Power Transmission Components |
| Manufacturer | Am General Llc |
| Status | ACTIVE |
| First End Bearing Seat Diameter | 1.250 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN |
| Second End Type | SPLINED |
| First End Thread Direction | RIGHT-HAND |
| First End Type | TAPERED |
| First End Pin Hole Diameter | 0.172 INCHES NOMINAL IN |
| First End Thread Size | 3/4-16 |
| First End Bearing Seat Width | 0.938 INCHES NOMINAL IN |
| Second End Spline Minor Diameter | 0.927 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN |
| Second End Bearing Seat | NOT INCLUDED |
| Second End Spline Major Diameter | 1.115 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN |
| First End Thread Series | UNF |
| Material Document and Classification | AISI 1035 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1035 ASSN STD SINGLE MATERIAL RESPONSE |
| First End Keyway Depth | 0.112 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN |
| First End Distance From Bearing Seat to End | 5.094 INCHES NOMINAL IN |
| First End Taper | 1.000 INCHES NOMINAL PER FOOT IN |
| First End Taper Major Diameter | 1.250 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN |
| Second End Spline Type | STRAIGHT |
| Material | STEEL COMP 1035 |
| First End Bearing Seat | INCLUDED |
| Metallic Hardness Rating | 48.0 MAXIMUM ROCKWELL C |
| Second End Spline Length | 1.500 INCHES NOMINAL IN |
| First End Keyway Width | 0.2485 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 933365 PRIMARY | Am General Llc (USA) |
| Reference | Meaning |
|---|---|
| 933365 | 5/9 Secondary reference Spalla Inc |
NSN 2520-00-229-5358 is a Shaft,axle,automotive, manufactured by Am General Llc, classified under FSC 2520, Vehicular Power Transmission Components. Status: active.
NSN 2520-00-229-5358 has 1 manufacturer part number on file: 933365 (Am General Llc).
Key specifications for 933365: First End Bearing Seat Diameter: 1.250 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN; Second End Type: SPLINED; First End Thread Direction: RIGHT-HAND; First End Type: TAPERED. 22 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.