PartsTable
Technical Data Sheet

2511 1-9/64 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

2511 1-9/64: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 7.250 INCHES NOMINAL IN, overall_length: 12.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-189-9309, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2511 1-9/64
NSN: 5133-00-189-9309
NIINs: 001899309, 002281358
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 03882 — NEW YORK TWIST DRILL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length7.250 INCHES NOMINAL IN
flute_quantity2
overall_length12.875 INCHES NOMINAL IN
special_featuresTAPER SHANK LG; FRACTIONAL SIZE 1-9/64
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter1.1406 INCHES IN
cutting_rotation_directionRIGHT-HAND
specification/standard_data05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5133-00-189-9309
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CONNECTOR,PLUG,ELECTRICAL TITLE COMPONENT PN 2511 1-9/64 MFR CONNECTOR,PLUG,ELECTRI
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 1 MORSE
•
FLUTE LENGTH: 3.125 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.2969 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR1 MORSE
FLUTE LENGTH3.125 INCHES NOMINAL IN
OVERALL LENGTH6.375 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.2969 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 19/64
SUBSTITUTES & CROSS-REFERENCES 10
C12117Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B94.11MReference document
Same NSN cross-reference
Reference document — Design control — primary reference
200 19/64Reference document
Same NSN cross-reference
Reference document — Secondary reference
209Reference document
Same NSN cross-reference
Reference document — Secondary reference
10019Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
310-RTReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 2511 1-9/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2511 1-9/64?
2511 1-9/64 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 2511 1-9/64?
There are 10 known substitutes for 2511 1-9/64: C12117, B94.11M, 200 19/64 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2511 1-9/64?
2511 1-9/64 is cataloged in the U.S. Government catalog under NSN 5133-00-189-9309. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2511 1-9/64