2511 1-19/32 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

2511 1-19/32: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 9.875 INCHES NOMINAL IN, overall_length: 16.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1385, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2511 1-19/32

NSN: 5133-00-228-1385
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 03882 — NEW YORK TWIST DRILL INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
point_type	CONVENTIONAL
point_angle	118.0 DEGREES NOMINAL
shank_style	STANDARD TAPER W/TANG
flute_length	9.875 INCHES NOMINAL IN
flute_quantity	2
overall_length	16.875 INCHES NOMINAL IN
special_features	TAPER SHANK LG; FRACTIONAL SIZE 1-19/32
cutting_end_style	GENERAL PURPOSE
nominal_cutting_diameter	1.5938 INCHES IN
cutting_rotation_direction	RIGHT-HAND
specification/standard_data	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN	5133-00-228-1385

COMPONENT DIAGRAM

KEY FEATURES

•

CUTTING END STYLE: GENERAL PURPOSE

•

TAPER SHANK SIZE DESIGNATOR: 5 MORSE

•

FLUTE LENGTH: 9.875 INCHES NOMINAL IN

•

NOMINAL CUTTING DIAMETER: 1.5938 INCHES IN

•

CUTTING ROTATION DIRECTION: RIGHT-HAND

•

SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SHANK STYLE: STANDARD TAPER W/TANG

TECHNICAL CHARACTERISTICS

CUTTING END STYLE	GENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR	5 MORSE
FLUTE LENGTH	9.875 INCHES NOMINAL IN
OVERALL LENGTH	16.875 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER	1.5938 INCHES IN
CUTTING ROTATION DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLE	STANDARD TAPER W/TANG
FLUTE QUANTITY	2
SPECIAL FEATURES	TAPER SHANK LG; FRACTIONAL SIZE 1-19/32

SUBSTITUTES & CROSS-REFERENCES 9

10099Reference document

Same NSN cross-reference

Reference document — Secondary reference

940 1-19/32Reference document

Same NSN cross-reference

Reference document — Secondary reference

20138Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10102Reference document

Same NSN cross-reference

Reference document — Secondary reference

12318Reference document

Same NSN cross-reference

Reference document — Secondary reference

B94.11MReference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 2511 1-19/32?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2511 1-19/32?

2511 1-19/32 is a RESISTOR,VARIABLE,NONWIRE WOUND,.

What parts can replace 2511 1-19/32?

There are 9 known substitutes for 2511 1-19/32: 10099, 940 1-19/32, 20138 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2511 1-19/32?

2511 1-19/32 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1385. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2511 1-19/32 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — 2511 1-19/32