PartsTable
Technical Data Sheet
Download PDF

2510TYPE11 1-2 — LOCK SET,RIM

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2510TYPE11 1-2: LOCK SET,RIM.

The LOCK SET,RIM is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CASE, knob_shape: TEE, design_type: DEAD BOLT, operation_method: KEY DEAD BOLT, features_provided: KEYWAY, locking_mechanism_type: PIN TUMBLER. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-480-1850, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2510TYPE11 1-2
NSN: 5340-00-480-1850
FSC: 5340 — Hardware, Commercial
CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY CASE
knob_shapeTEE
design_typeDEAD BOLT
knob_quantity1
operation_methodKEY DEAD BOLT
special_featuresCASE SHAPE:TUBULAR;KNOB SURFACE TREATMENT:A/A;KNOB DESIGN:PLAIN;RELEASE BAR:NOT INCLUDED;MASTER KEY PROVISION:NOT INCLUDED;
features_providedKEYWAY
locking_mechanism_typePIN TUMBLER
NSN5340-00-480-1850
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2510TYPE11 1-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING MECHANISM TYPE: PIN TUMBLER
•
DESIGN TYPE: DEAD BOLT
•
FEATURES PROVIDED: KEYWAY
•
KNOB SHAPE: TEE
•
KNOB QUANTITY: 1
•
MATERIAL: COPPER ALLOY CASE
TECHNICAL CHARACTERISTICS
LOCKING MECHANISM TYPEPIN TUMBLER
DESIGN TYPEDEAD BOLT
FEATURES PROVIDEDKEYWAY
KNOB SHAPETEE
SPECIAL FEATURESCASE SHAPE:TUBULAR;KNOB SURFACE TREATMENT:A/A;KNOB DESIGN:PLAIN;RELEASE BAR:NOT INCLUDED;MASTER KEY PROVISION:NOT INCLUDED;
KNOB QUANTITY1
MATERIALCOPPER ALLOY CASE
MATERIALCOPPER ALLOY INACTIVE CASE
OPERATION METHODKEY DEAD BOLT
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
M53500010Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2510TYPE11 1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2510TYPE11 1-2?
2510TYPE11 1-2 is a LOCK SET,RIM.
What parts can replace 2510TYPE11 1-2?
There is 1 known substitute for 2510TYPE11 1-2: M53500010. Substitute compatibility should be verified for your specific system.
What is the NSN for 2510TYPE11 1-2?
2510TYPE11 1-2 is cataloged in the U.S. Government catalog under NSN 5340-00-480-1850. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2510TYPE11 1-2