PartsTable
Technical Data Sheet
251-3005 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CENTER,LATHE is a the manufacturer industrial component. Key specifications include design_type: LIVE, bearing_type: ROLLER, specific_use: LATHE, special_features: DOOR GASKET, point_replaceability: REPLACEABLE, end_item_identification: 6530-01-120-2650 & 6530-01-273-8701; STERILIZER, SURGICAL INSTRUMENT ANDZZZPJMODEL GLS 10 AND MC 10. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-308-9415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
251-3005
NSN: 5330-01-308-9415
FSC: 5330
CAGE: 05852 — BARNSTEAD THERMOLYNE CORPORATION DBA BARNSTEAD INTERNATIONAL DIV LABORATORY EQUIPMENT (USA)
SPECIFICATIONS
design_typeLIVE
bearing_typeROLLER
specific_useLATHE
special_featuresDOOR GASKET
point_replaceabilityREPLACEABLE
end_item_identification6530-01-120-2650 & 6530-01-273-8701; STERILIZER, SURGICAL INSTRUMENT ANDZZZPJMODEL GLS 10 AND MC 10
inserted_point_accommodationPROVIDED
purchase_description_identification32510-513005
NSN5330-01-308-9415
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 251-3005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
PURCHASE DESCRIPTION IDENTIFICATION: 32510-513005
TECHNICAL CHARACTERISTICS (FLIS)
PURCHASE DESCRIPTION IDENTIFICATION32510-513005
END ITEM IDENTIFICATION6530-01-120-2650 & 6530-01-273-8701; STERILIZER, SURGICAL INSTRUMENT ANDZZZPJMODEL GLS 10 AND MC 10
SPECIAL FEATURESDOOR GASKET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
513005Interchangeable
interchangeable cross-reference
interchangeable
1008118Interchangeable
interchangeable cross-reference
interchangeable
OP5535Interchangeable
interchangeable cross-reference
interchangeable
251-3005Interchangeable
interchangeable cross-reference
interchangeable
251-3035Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 251-3005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 251-3005?
251-3005 is a CENTER,LATHE.
What parts can replace 251-3005?
There are 5 known substitutes for 251-3005: 513005, 1008118, OP5535 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 251-3005?
251-3005 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-308-9415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 251-3005