PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 25081
25081 ✓ Verified by PartsTable
Clementoni · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include width: 0.250 INCHES NOMINAL IN, height: 0.312 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN, material: STEEL OVERALL, bore_shape: STRAIGHT, cut_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6720, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25081
NSN: 3110-00-155-6720
FSC: 3110
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
height0.312 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
materialSTEEL OVERALL
bore_shapeSTRAIGHT
cut_length0.625 INCHES NOMINAL IN
head_styleHEXAGON
point_typeCONVENTIONAL
shank_typeWELDON
design_formSINGLE END
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
NSN3110-00-155-6720
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 25081 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER45.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
SHIELD QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
C12132Interchangeable
interchangeable cross-reference
interchangeable
29334Interchangeable
interchangeable cross-reference
interchangeable
2410 21/64Interchangeable
interchangeable cross-reference
interchangeable
M168Interchangeable
interchangeable cross-reference
interchangeable
M554Interchangeable
interchangeable cross-reference
interchangeable
7220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 25081?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25081?
25081 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Clementoni.
What parts can replace 25081?
There are 27 known substitutes for 25081: C12132, 29334, 2410 21/64 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 25081?
25081 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6720. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25081

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026