PartsTable
Technical Data Sheet
Download PDF

2506 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Multibrackets · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2506: CONE AND ROLLERS,TAPERED ROLLER.

Finally a solution that gives you the highest quality of cablehide to an equal aggressive pricepoint. Match the quality in your home cinema or hifi system with equal quality when hiding your recess wiring. The M Universal Cable Sock Roll is knitted polyester of highest quality and with sleek nordic design.

The M Universal Cable Socks holds any type of cables for example Scart, HDMI, CRT, VGA and other main leads and expands easily. Expansion of the M Universal Cable Sock is approximately twice the size of the cable sock unexpanded, 20mm (40mm expanded), 40mm (80mm expanded), 55mm (110mm expanded). Different sizes and colours give all users the possibility to individually choose size and colour depending on certain needs.

Multibrackets has a large variety of choices in both colours and lengths. The M Universal Cable Sock are perfect products for easy hide of your wiring at home, or in the office. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0778, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2506
NSN: 3110-00-100-0778
NIINs: 001000778, 001257182, 001872567, 001883655, 002411163, 002882054, 004539019, 005953108, 006953587, 009246396, 009831263, 010056943, 011552790, 012077930, 012236752, 012995116, 013180893, 013398339, 013628046, 015493588, 015833230, 016206229
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 54108 — D & J PARTS INC (USA)
SPECIFICATIONS
phaseTHREE INPUT
shapeSTRAIGHT
length1.250 INCHES NOMINAL IN
capacity6.0 OUNCES OZ
diameter0.250 INCHES NOMINAL IN
materialPLASTIC NYLON
tip_typeREMOVABLE
cone_width1.2160 INCHES NOMINAL IN
duty_cycleCONTINUOUS
flat_depth0.0300 INCHES NOMINAL SINGLE END IN
shaft_typeROUND SINGLE ACTUATOR
temp_rating-54.0 OPERATING CELSIUS AND 77.0 OPERATING CELSIUS
NSN3110-00-100-0778
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2506 · Multibrackets ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
CONE WIDTH: 1.2160 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
CONE WIDTH1.2160 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
K3576Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
705296Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3109040Reference document
Same NSN cross-reference
Reference document — Secondary reference
5030Reference document
Same NSN cross-reference
Reference document — Secondary reference
RD41536Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
14141Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2506?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2506?
2506 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2506?
There are 9 known substitutes for 2506: K3576, 705296, 3109040 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2506?
2506 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2506