PartsTable
Technical Data Sheet
Download PDF

250507 — VALVE,ROTALOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

250507: VALVE,ROTALOCK.

The VALVE,ROTALOCK is a the manufacturer industrial component. Key specifications include width: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, length: 0.788 INCHES NOMINAL IN, hole_diameter: 0.119 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN, loop_opening_width: 0.125 INCHES NOMINAL IN, material_thickness: 0.015 INCHES NOMINAL IN, distance_from_end_to_nearest_bend: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-059-7938, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
250507
NSN: 5340-01-059-7938
NIINs: 010597938, 015723418
FSC: 5340 — Hardware, Commercial
CAGE: 32153 — EASTMAN KODAK CO COMMERCIAL & GOVERNMENT SYSTEMS (USA)
SPECIFICATIONS
width0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
length0.788 INCHES NOMINAL IN
hole_diameter0.119 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
loop_opening_width0.125 INCHES NOMINAL IN
material_thickness0.015 INCHES NOMINAL IN
distance_from_end_to_nearest_bend0.375 INCHES NOMINAL IN
NSN5340-01-059-7938
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 250507 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.788 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
DISTANCE FROM END TO NEAREST BEND: 0.375 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.125 INCHES NOMINAL IN
•
WIDTH: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.119 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.788 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
DISTANCE FROM END TO NEAREST BEND0.375 INCHES NOMINAL IN
LOOP OPENING WIDTH0.125 INCHES NOMINAL IN
WIDTH0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
HOLE DIAMETER0.119 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 250507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 250507?
250507 is a VALVE,ROTALOCK.
What is the NSN for 250507?
250507 is cataloged in the U.S. Government catalog under NSN 5340-01-059-7938. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 250507