PartsTable
Technical Data Sheet
Download PDF

25042-0001 — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

25042-0001: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, head_height: 0.047 INCHES NOMINAL IN, overall_height: 0.282 INCHES NOMINAL IN, special_features: BLACK LINE DISPLAYED ON TOP OF BUTTON MEASURING THE RADIUS OF THE TOP, style_designator: STANDARD, surface_treatment: PAINT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-160-6614, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
25042-0001
NSN: 5340-01-160-6614
FSC: 5340 — Hardware, Commercial
CAGE: 27914 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
head_height0.047 INCHES NOMINAL IN
overall_height0.282 INCHES NOMINAL IN
prong_quantity5
special_featuresBLACK LINE DISPLAYED ON TOP OF BUTTON MEASURING THE RADIUS OF THE TOP
style_designatorSTANDARD
surface_treatmentPAINT
head_outside_diameter0.492 INCHES NOMINAL IN
prong_outside_diameter0.457 INCHES NOMINAL IN
hole_accommodation_diameter0.457 INCHES NOMINAL IN
NSN5340-01-160-6614
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 25042-0001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.047 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.457 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 0.457 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT
•
HEAD OUTSIDE DIAMETER: 0.492 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.282 INCHES NOMINAL IN
HEAD HEIGHT0.047 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.457 INCHES NOMINAL IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER0.457 INCHES NOMINAL IN
SPECIAL FEATURESBLACK LINE DISPLAYED ON TOP OF BUTTON MEASURING THE RADIUS OF THE TOP
SURFACE TREATMENTPAINT
HEAD OUTSIDE DIAMETER0.492 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
PRONG QUANTITY5
SUBSTITUTES & CROSS-REFERENCES 1
30-15-11-3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 25042-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 25042-0001?
25042-0001 is a BUTTON,PLUG.
What parts can replace 25042-0001?
There is 1 known substitute for 25042-0001: 30-15-11-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 25042-0001?
25042-0001 is cataloged in the U.S. Government catalog under NSN 5340-01-160-6614. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 25042-0001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.