PartsTable
Technical Data Sheet
Download PDF

250218 — PRINTER,AUTOMATIC DATA PROCESSIN

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

250218: PRINTER,AUTOMATIC DATA PROCESSIN.

PRINTER,AUTOMATIC DATA PROCESSIN. Key specifications include material: PLASTIC POLYESTER OVERALL, overall_height: 0.783 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN, special_features: ONE SLOT .083 IN. WIDE .140 IN.

DEEP IN, style_designator: PLAIN, body_inside_diameter: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, body_outside_diameter: 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 4820-00-915-4636, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 250218
NSN: 4820-00-915-4636
NIINs: 009154636, 009889625, 011896591, 015933442
FSC: 4820 — Valves, Nonpowered
CAGE: 01343 — ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY (USA)
SPECIFICATIONS
materialPLASTIC POLYESTER OVERALL
overall_height0.783 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN
special_featuresONE SLOT .083 IN. WIDE .140 IN. DEEP IN
style_designatorPLAIN
body_inside_diameter0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
body_outside_diameter0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
seating_surface_shapeFLAT
inside_surface_conditionSMOOTH
cross-sectional_shape_styleROUND
measuring_method_and_length144.000 INCHES NOMINAL OVERALL IN
NSN4820-00-915-4636
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 250218 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 250218 MFR OEM
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PLAIN
•
BODY INSIDE DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYESTER OVERALL
•
SEATING SURFACE SHAPE: FLAT
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.783 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
STYLE DESIGNATORPLAIN
BODY INSIDE DIAMETER0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
SPECIAL FEATURESONE SLOT .083 IN. WIDE .140 IN. DEEP IN
MATERIALPLASTIC POLYESTER OVERALL
SEATING SURFACE SHAPEFLAT
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 250218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 250218?
250218 is a PRINTER,AUTOMATIC DATA PROCESSIN. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What is the NSN for 250218?
250218 is cataloged in the U.S. Government catalog under NSN 4820-00-915-4636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 250218

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.