PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2500792-5
2500792-5 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, diameter: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, material: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.062 INCHES MAXIMUM IN, hardness_rating: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-811-1265, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2500792-5
NSN: 5315-00-811-1265
FSC: 5315
CAGE: 07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
height0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
diameter0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
materialSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
head_stylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
chamfer_length0.062 INCHES MAXIMUM IN
hardness_rating26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
special_featuresTHE SHANK END OF PIN MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR
style_designatorSTRAIGHT
pin_chamfer_angle14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
pin_head_diameter0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
under_head_length0.585 INCHES MINIMUM AND 0.605 INCHES MAXIMUM IN
NSN5315-00-811-1265
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2500792-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.091 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PIN CHAMFER ANGLE: 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
•
HARDNESS RATING: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.091 INCHES NOMINAL IN
SPECIAL FEATURESTHE SHANK END OF PIN MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
PIN CHAMFER ANGLE14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
HARDNESS RATING26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
MATERIALSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
HEIGHT0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
231-0001Interchangeable
interchangeable cross-reference
interchangeable
231-0001-1Interchangeable
interchangeable cross-reference
interchangeable
23-10001-070Interchangeable
interchangeable cross-reference
interchangeable
17513Interchangeable
interchangeable cross-reference
interchangeable
231-0-001 REV AInterchangeable
interchangeable cross-reference
interchangeable
230-0-001 REV E ITEM NO. 44Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2500792-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2500792-5?
2500792-5 is a PIN,STRAIGHT,HEADED.
What parts can replace 2500792-5?
There are 10 known substitutes for 2500792-5: 231-0001, 231-0001-1, 23-10001-070 and 7 more. Substitute compatibility should be verified for your specific system.
Is 2500792-5 still available?
2500792-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2500792-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026